Screwed End, Slab Gate Model M

All Model M Series Gate Valves are profiled after the original WKM Model M Gate Valve. All dimensions interchange parts. The Model M Series Gate Valve utilizes a "Packing Injection Fitting" in the bonnet assembly to provide an injectionable stem packing to the stem seal area while under pressure. The Model M Series Gate Valve is a cast body line.

MODEL M 2000 - 3000 - 5000 LB. W.P.
2 1/16" - 2 9/16" - 3 1/8" - 4 1/16" - 5 1/8"
SCREWED END, SLAB GATE,
(HANDWHEEL OPERATED)

Screwed End, Slab Gate Model M Valve
Size Available Threads
2 1/16" 2 3/8" EUE 8RD; 2" LP
2 9/16" 2 7/8" EUE 8RD; 2 1/2" LP
3 1/8" 3 1/2" EUE 8RD; 3" LP
4 1/16" 4 1/2" EUE 8RD; 4" LP
4 1/2" 8RD Long Casing
Screwed End, Slab Gate Model M Valve Assembly Bill of Materials
Screwed End, Slab Gate Model M Valve Specifications Diagram
Screwed End, Slab Gate Model M Valve Specifications

The Model MSG (Slab Gate-Hence Model SG) is dimensionally the same as the Model M, except utilizes the slab gate which is preferred for manifold and frac applications. The Slab Gate is a bidirectional gate valve sealing on the downstream gate to seat when placed in the flow stream facing either direction. The Slab Gate requires pressure from upstream to force the seal of the gate against the downstream seat.

For low temperature applications, we use Valveworks USA proprietary valve lubricant (SAM 4012B). It is black in appearance and has a service temperature range of -75°F to 250°F.

All dimensions in inches, weights in lbs. If dimensions/weights are critical, please consult factory. Valveworks USA reserves the right to alter designs and specifications without notice.

Last Updated: 08/19/2013